Category: News

2017 AMPBA National Championships

We spent the last week attending the AMPBA National Championships in a small country town on the NSW/VIC border named Finley. Hosted by the Southern Riverina Model Power Boat Club (SRMPBC), we could not have anticipated a better event!  The SRMPBC committee put on an absolutely outstanding two days of testing and four days of racing.

Attended by model boaters from across Australia, the racing was extremely competitive while the conditions were at times very testing (cold and windy). At the end of the week, more than 180 heats were contested over five complete rounds of racing. We managed to bring home a second in open petrol tunnel and a third in open petrol rigger.

Click here to see a handful of photos that we took during the event.  In the coming week we will upload a short video featuring highlights from the tons of footage we filmed.

(more…)

What’s in the workshop?

Apologies, things have been a little quite here on the RC Boat Builder website. Whilst we are extremely active on our Facebook Page we have neglected the website over the past nine months. It takes time to add content to the website and with things having been quite busy in the workshop. We have been using Facebook as the primary way to keep everyone up to date. If your a Facebook user, make sure you jump on the page and give it a like.

So with that in mind, what have we been busy building? Well quite a few different hulls.  Ranging from Deltaforce monos, Stryker catamarans and most recently Zipp Kits wooden outriggers.
Twelve months ago we started racing at a club level and are now throwing our hats in the ring at various trophy events.  That experience has lead us into building a trailer full of race pedigree hulls.

We are thoroughly enjoying the club racing events and the opportunity to network with like minded individuals with a ton of experience!  Still relatively new to the trophy events, we remain respectful of the other competitors on the water, while we learn the techniques, tips and tricks to become competitive racers.

If you are a hobbyist in Australia, we would encourage you to reach out to your local club. You will be more than surprised at how welcoming the community of model boaters are within Australia.

The Australian  Model Power Boat Association website contains all of the details you require to make contact with your local club.

 

AC Model Boats R42

AC Model Boats have a reputation for superior design and quality finishes. Owned and operated by Andy Stishenko, AC have been designing and manufacturing model power boats since 1983.
Extremely popular throughout North America, the R42 catamaran is one of the most popular choices for modelers racing in the gas powered tunnel classes.

Unfortunately being based in British Columbia, Canada. It’s not an easy task to get your hands on a genuine AC Model Boat here in Australia.  Fortunately, through months of research we managed to find an economical shipping route to get our hands on the latest version of the R42 (now 43″ inches long).

Click here to see the complete build of the AC Model Boats R42 catamaran 43″ race tunnel.

Deltaforce Annihilator 53

We were appointed as a Deltaforce dealer in 2016 and have imported the entire range of their gas powered monos into Australia. Used by racers around Australia, these hulls have been designed with one thing in mind!

Winning races and keeping costs below what you would expect to pay for a race winning hull.
Manufactured in Hong Kong from a specialist composite workshop, the quality of these hulls is fantastic.

Click here to see the complete build of the Deltaforce Annihilator 53″ race mono.

Tuning a Walbro Carburetor

Carburetors require regular adjustment to ensure peak performance, and also to avoid an unsafe lean condition, which can prematurely damage your engine. If you find your top-end RPM’s have fallen off a bit, or if you experience lagging or surging, it is probably time to re-adjust the carb needles.

The carburetor is provided with 3 adjust screws they may need a little adjustment depending on the temperature, atmospheric pressure (altitude), etc. of the area where the engine is used.

carb

(more…)

Hunter Valley Model Marine Club

HVMMC

HVMMC

The Hunter Valley Model Marine Club is situated in Maitland NSW.  Model boat races in Australia know the venue as Possums Puddle.  The HVMMC is one of the only model boat clubs in Australia with dedicated access to the pond everyday of the year.

It boasts a great member base of people from Sydney to Newcastle and runs petrol, electric and nitro model boat classes.

We recently joined the club and here is a quick video from our first visit!

Everingham Race Special Build

Everingham Race Special

Everingham Race Special

We have just posted up a complete build photo log of the new Everingham Race Special. This is the latest model boat from Gary and Bert Everingham.

Forty-seven inches long and packing some serious punch.  This build was planned with performance in mind. Powered by one of the new full mod Torpedo Race Engines 29.5cc and the entire range of Torpedo performance accessories including the Hi-Flow Rudder Set.

Checkout the build page for all of the photos.

Model Boat Club of NSW

The Model Boat Club of NSW was originally established in 1965 and currently calls the Sydney International Regatta Centre home. It’s regarded as some of the best water in the world for model boating due to consistently smooth conditions.

Whilst the club thrives on nitro and electric classes, there are still many members running larger petrol boats. Here is a video of a recent club practice day. As you can see from the video, everyone had a great day out on the water. You can find out more about the club and it’s history by visiting their website. http://www.modelboatclubofnsw.com/

Everingham ‘Race Special Edition’

We’ve been keeping this one under wraps for some time now, but are excited to finally share video footage of a brand new Australian made RC hull. The Everingham ‘Race Special Edition’ is in it’s final stages of development and last weekend we were invited to witness it’s first extensive water test.

As you can see in the footage, this is not your average scale replica of the full scale Everingham hulls. Instead Gary and Bert Everingham have been hard at work over the past six months building a competitive race mono.  Based on the results of last weekends water test, it’s safe to say they are onto something great with this hull!

Torpedo Race Engines Video

Checkout the video of one of our basher boats packing some serious punch with a new Torpedo Race Engines 29.5cc Zenoah.

Social Media:

We Use & Recommend:

About Us

We are passionate about radio-controlled model power boats.

Through our network of suppliers around the world, we offer a range of quality hulls, gas motors and premium hardware.

Our services range from full assembly of a bare hull to simple repairs and maintenance.

For a quote or more information, please do not hesitate to Contact Us.